Ovonic 500mah 3S 11.1V 35C Lipo Battery Pack with JST Plug for Airplane&Heli(2pcs)
Ovonic has gradually recognized by the RC hobbyists and been highly recommended to radio control because of its excellent performance and cost-effectiveness. With being strict of product quality, Ovonic is specially designed and manufactured for your high-quality RC devices.
LiPo 3s 500mah is designed for small RC airplane, RC Heli, TX, airsoft and mini car 1/36 BL losi micro high roller and etc.
And ovonicshop also offers 3s 650mah lipo and more 3s lipo batteries for you to pick.
Spec of 500mah 3s:
Brand |
Ovonic |
Chemistry |
Li-polymer |
Configuration |
3S |
Voltage(V) |
11.1V |
Capacity(mAh) |
500mAh |
Discharge Rate |
35C |
Charge Plug |
JST-XH |
Discharge Plug |
JST Connector |
Net Weight(dev.20g) |
88g(44g for one pack) |
Length(dev.5mm) |
56mm |
Width(dev.2mm) |
30mm |
Height(dev.2mm) |
19mm |
Compatible with:
*Plane:
e-flite Mustang 280 (tightly), small Flitetest airplanes like the Nutball and Flyer, turnigy bonsai wing ,small foamie, FT Swappable builds, Yak mit 80cm Spw, depron biplane, Twinstar 2 MiniSwift with Upgrade, Kinetic 800, low-weight foamies or for feeding cameras/FPV, small foam flying, Slowflyer, small garden flyer, medele depron outdoor , GWS ME 262, 78cm Shockflyer Extra XXL Piaget, foamie ultimate V2(160g), Multiplex Merlin, Fascinate F3A Depron, F3A Ikarus shockflyer, slofly22 foamy, small foam cub rc airplane
*Heli:
btt cupid and my blade cp
Hirobo Quark SG.
small 4-Channel 2.4Ghz Walkera CB180D helicopter.
*TX:
walkera 2402
1500mw FPV TX&CAM setup
video tx
fpv camera and tx
Futaba 8HUs TX
FPV system
FPV equipment in the Easy Glider Pro
*Airsoft:
mpx
*Cars:
1/36 BL losi micro high roller
Please Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
To double make sure safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use Balance Charger to charge and recycle several times first.